Double Roller Crusher for Limestone
Introduction : The structure of the equipment is simple, and the phenomenon of excessive breakage is less.
Product Use : The roller crusher is suitable for the coarse and intermediate crushing of brittle block materials in cement, chemical industry, electric power, mining, building materials, metallurgy and other industries. Its input particle size is large, the output particle size is adjustable, and it can crush the materials with duI compressive strength less than 160 mpA.
Production Capacity
20–180t/hFeeding Size
300-500mm
200
+
More than 200
Kinds of materials
Product introduction
Double roll crusher on the surface of the roller tooth arrange can change along with the nature of the material, size, can be in of the hard and soft ore, fine crushing, such as sulfuric acid factory showed jaw crusher to a rubble of pyrite ore, make up to 20~ 30 mm in diameter, then went into double roll crusher for secondary crushing, ore to under 5 mm in diameter, to achieve the requirement of the fluidized bed.
Product Advantage
Large crushing ratio;
Low overpowder rate and good particle size;
The structure is simple and easy to repair;
Structure standardization.
Technical Parameters
|
Model |
Feeding size（mm） |
Discharging granularity（mm） |
Capacity(t/h) |
Power(kw) |
Weight(t) |
|
2PGC450×500 |
300 |
15-75 |
20-45 |
7.5×2 |
4.2 |
|
2PGC600×750 |
400 |
15-125 |
30-80 |
18.5×2 |
7.8 |
|
2PGC600×900 |
400 |
15-125 |
40-100 |
18.5×2 |
8.4 |
|
2PGC600×1200 |
400 |
15-125 |
50-120 |
22×2 |
11.2 |
|
2PGC800×1000 |
400 |
20-150 |
80-180 |
22×2 |
12.6 |
|
2PGC800×1200 |
400 |
20-150 |
100-220 |
30×2 |
15.2 |
|
2PGC900×900 |
500 |
30-150 |
80-180 |
30×2 |
14.5 |
