Micro Powder Mill
Introduction: High pressure micro powder mill is a kind of fine powder grinding equipment, suitable for grinding the non-inflammable and non-explosive materials with mohs hardness below 9.3 and humidity less than 6%.
Applicable materials: feldspar, talc, marble, carbon black, argil, limestone, kaolin, calcite, gypsum, etc.
Shift output
0.2~12tFeeding Size
≤15mm--≤25mm
200
+
Final product size
0.125-0.033mm
Product introduction
High pressure micro powder mill is a kind of fine powder grinding equipment, suitable for grinding the non-inflammable and non-explosive materials with mohs hardness below 9.3 and humidity less than 6%. Compared with other powder mills, the grinding pressure on materials of high-pressure micro powder mill increase 800kg-1200kg under the effect of high pressure spring. The fineness of final products can be adjusted in a large range.
Product advantage
Reasonable structure, small floor area.
Reliable performance, convenient maintenance.
High grinding pressure, applicable for grinding materials with multiple hardness.
Effectively lower the noise and avoid the dust pollution and air pollution.
Good operating environment, dust emissions meets the national standards.
Technical Parameters
|
Model |
Feeding size |
Final product size |
Shift output of different material fineness |
Rotate speed of pulverizing ring |
Diameter of pulverizing ring |
Diameter of pulverizing roller |
Height of pulverizing roller |
Main Motor |
Fan Motor |
Analyzer Motor |
|
Micropowder93 |
≤25mm |
0.125-0.010mm |
0.8-12t |
140r/min |
1006mm |
300mm |
160mm |
Y225M-8-30 |
Y180M-2-22 |
YCT180M-4A-4 |
|
Micropowder92 |
≤25mm |
0.125-0.033mm |
0.6-10t |
148r/min |
973mm |
300mm |
160mm |
Y225M-8-22 |
Y180L-4-22 |
YCT180M-4A-4 |
|
Micropowder87 |
≤20mm |
0.125-0.010mm |
0.4-8t |
160r/min |
907.5mm |
270mm |
150mm |
Y225M-8-22 |
Y160L-4-18.5 |
YCT180M-4A-4 |
|
Micropowder76 |
≤20mm |
0.125-0.033mm |
0.3-6t |
170r/min |
850mm |
250mm |
150mm |
Y225S-8-18.5 |
Y160L-4-15 |
YCT160-4B-3 |
|
Micropowder66 |
≤15mm |
0.125-0.010mm |
0.2-4t |
180r/min |
725mm |
210mm |
150mm |
Y225M-8-15 |
Y160L-4-11 |
YCT160-4B-3 |
Successful project
-
nodata
