Wet Pan Mill
Introduction : It is used for grinding all kinds of ferrous, nonferrous and nonmetallic minerals, as well as grinding, separating and processing rare metals gold and silver. It is the best first grinding equipment for the majority of small and medium-sized concentrators and powder mills.
Product Improvement : It is based on the ancient stone mill, after modern improvement and development.
Production Capacity
0.15–2t/hPower
5.5-30kw
200
+
Weight
4.3-13.5t
Product introduction
Wet mill wet mill wet, is based on the ancient stone mill, after modern improvement and development.It is used for grinding all kinds of ferrous, nonferrous and nonmetallic minerals, as well as grinding, separating and processing rare metals gold and silver. It is the best first grinding equipment for the majority of small and medium-sized concentrators and powder mills.
Working principle
the equipment is mainly composed of power unit, frame, birdbath, roller, roller and so on, and adopts wheel moving grinding.
Product Advantage
The motor drives the power to the reducer. Under the drive of the reducer, the torque is transferred to the upper horizontal axis through the large vertical axis.
The torque is transferred to the roller through the pull rod installed at both ends of the horizontal axis.In operation.
Technical Parameters
|
Model |
Specification |
The feed size(mm) |
Output(t/h) |
Power(kw) |
Weight(t) |
|
HF1600 |
1600X350X200X460±20mm |
<25mm |
1-2 |
30 |
13.5 |
|
HF1500 |
1500X300X150X420±20mm |
<25mm |
0.8-1.5 |
22 |
11.3 |
|
HF1400 |
1400X260X150X350±20mm |
<25mm |
0.5-0.8 |
18.5 |
8.5 |
|
HF1200 |
1200X180X120X250±20mm |
<25mm |
0.25-0.5 |
7.5 |
5.5 |
|
HF1100 |
1100X160X120X250±20mm |
<25mm |
0.15-0.25 |
5.5 |
4.5 |
|
HF1000 |
1000X180X120X250±20mm |
<25mm |
0.15-0.2 |
5.5 |
4.3 |
Successful project
-
nodata
